Wet room vs walk-in shower: what affects the cost?
By Eli Gjoka · Updated
Short answer
A wet room usually costs more than a walk-in shower, because the whole floor has to be laid to a slope and waterproofed, not just the shower area. A walk-in shower keeps that work to one corner of the room. What you'll actually pay depends on your floor, your drainage and the finish you choose, which is why we price each job after a free site visit.

On this page
The main difference
In a wet room, the whole bathroom is the shower. The floor slopes gently to a drain, and the floor and walls are waterproofed before tiling, so there's no tray and no step.
A walk-in shower is a large shower area behind a fixed glass screen, with a low tray or a tiled floor. Only that area needs the slope and full waterproofing, and the rest of the room stays dry.
Why a wet room usually costs more
- More floor to rebuild. The whole floor, not just the shower area, has to be formed with a fall to the drain. On some floors that means lifting boards or cutting into the screed.
- More waterproofing. Every part of the floor and the lower walls is waterproofed, sometimes called tanking, before the tiles go down.
- More tiling. With no tray, the whole floor is tiled, often with smaller tiles that follow the slope.
- Drainage. The drain has to sit at the lowest point, and the waste pipe has to reach it with enough fall. If it can't, more of the floor has to change.
What affects the cost of either one
- The size of the room and the shower area.
- The floor you have. Timber floors and concrete floors are prepared in different ways, and the condition of the floor matters.
- Where the drain and waste can go. Moving the shower away from the existing pipes adds work.
- The tiles you choose. Large-format tiles, natural stone and intricate patterns take longer to lay.
- The screen, tray, shower and fittings.
- Electrics. A new extractor fan, lighting or underfloor heating is done by a certified electrician.
- Building regulations. Work that affects the structure, drainage or electrics can need approval.
Which is better value for your bathroom?
For most bathrooms, a walk-in shower gives you a big, easy-to-use shower for less work. A wet room makes most sense in a small bathroom, where a screen and tray would crowd the room, or where someone wants a completely level floor from the door to the shower.
If you're replacing a bath, a walk-in shower in the same space is often the simplest change, because the pipework is already close by.
Do you need building regulations approval?
Often, for a wet room. The Planning Portal says approval is most likely when the work affects the structure of the room, the drainage or the electrics. Electrical work in a bathroom is done by a certified electrician, who can certify it. If your job needs approval, Eli will tell you at the site visit.
Getting an accurate price
The only way to price either option properly is to look at the room. At the free site visit, Eli checks the floor, the joists or screed and the drainage, talks through the layout and tiles with you, and then gives you a written, fixed-price quote.
Planning work like this?
Eli comes to see the job for free and gives you a written, fixed-price quote.
Common questions
Is a wet room more expensive than a walk-in shower?
Usually, yes. The whole floor has to be laid to fall and waterproofed, and more of it is tiled.
Can any bathroom become a wet room?
Not always. There has to be room to build in the slope and the drain, and the waste pipe has to reach the right spot. Eli checks this at the site visit.
Is a walk-in shower easier to fit?
Usually. Only the shower area needs the fall and full waterproofing.
Can I turn my bath into a walk-in shower?
Yes. The bath comes out and a walk-in shower goes in its place, often using the existing pipework.
Can you give me a price without a visit?
Eli prices each job after the free site visit, because every bathroom and floor is different. You then get a written, fixed-price quote.